Search results for "Optical link"
showing 10 items of 10 documents
Functional super Read-Out Driver demonstrator for the Phase II Upgrade of the ATLAS Tile Calorimeter
2011
This work presents the implementation of a functional super Read-Out Driver (sROD) demonstrator for the Phase II Upgrade of the ATLAS Tile Calorimeter (TileCal) in the LHC experiment. The proposed front-end for the Phase II Upgrade communicates with back-end electronics using a multifiber optical connector with a data rate of 57.6 Gbps using the GBT protocol. This functional sROD demonstrator aims to help in the understanding of the problems that could arise in the upgrade of back-end electronics. The demonstrator is composed of three different boards that have been developed in the framework of ATLAS activities: the Optical Multiplexer Board (OMB), the Read-Out Driver (ROD) and the Optical…
Ethernet FSO Communications Link Performance Study Under a Controlled Fog Environment
2012
In this letter the performance of a free space optical (FSO) communication link in the presence of fog is experimentally investigated in an indoor environment. A dedicated indoor atmospheric chamber, replicating the outdoor environment, is being used to evaluate the FSO link performance under the fog condition. Theoretical analysis supported by the experimental evaluation has been carried out for the intensity modulation/direct detection on-off keying non-return-to-zero (OOK-NRZ), OOK return-to-zero (OOK-RZ) and four pulse position modulation (4-PPM) modulation formats at the Ethernet baseline data-rate. The results shown indicate that the 4-PPM signalling scheme is the most robust to the f…
Optoelectronic Module with Integrated Transceiver and Mux-Demux for Optical Interconnect Applications
2019
The design, development and improvtableement in electronic devices and components have led to the further miniaturization of the system devices and their interconnecting interfaces. Hence, reducing the size of the transmitter (Tx) chips, receiver (Rx) chips and associated components play an important role in designing a reduced/small sized optoelectronic modules for optical interconnect applications. Some of the associated components include multiplexer, demultiplexer, clock and data recovery circuits (CDR), etc. Therefore, in this paper we present an optoelectronic module with integrated transceiver (Tx-Rx) and multiplexer-demultiplexer (mux-demux) with the aim of reducing the total area o…
Optical Link Card Design for the Phase II Upgrade of TileCal Experiment
2011
This paper presents the design of an optical link card developed in the frame of the R&D activities for the phase 2 upgrade of the TileCal experiment. This board, that is part of the evaluation of different technologies for the final choice in the next years, is designed as a mezzanine that can work independently or be plugged in the optical multiplexer board of the TileCal backend electronics. It includes two SNAP 12 optical connectors able to transmit and receive up to 75 Gb/s and one SFP optical connector for lower speeds and compatibility with existing hardware as the read out driver. All processing is done in a Stratix II GX field-programmable gate array (FPGA). Details are given on th…
Absolute frequency and isotope shift measurements of mercury 1S0–3P1 transition
2019
We report the measurement of the absolute frequencies of the 6s2 1S0−6s6p 3P1 transition (253.7 nm) and the relevant isotope shifts in five mercury isotopes 198Hg, 199Hg, 200Hg, 202Hg, and 204Hg. The Doppler-free saturated absorption measurements were performed in an atomic vapour cell at room temperature with a four-harmonic generated (FHG) continuous-wave (cw) laser digitally locked to the atomic transition. It was referenced with a femtosecond optical frequency comb synchronized to the frequency of local representation of the International Atomic Time to provide traceability to the SI second by the 330 km-long stabilized fibre optical link. The transition frequencies and isotope shi…
Performance of the front-end electronics of the ANTARES neutrino telescope
2010
ANTARES is a high-energy neutrino telescope installed in the Mediterranean Sea at a depth of 2475 m. It consists of a three-dimensional array of optical modules, each containing a large photomultiplier tube. A total of 2700 front-end ASICs named Analogue Ring Samplers (ARS) process the phototube signals, measure their arrival time, amplitude and shape as well as perform monitoring and calibration tasks. The ARS chip processes the analogue signals from the optical modules and converts information into digital data. All the information is transmitted to shore through further multiplexing electronics and an optical link. This paper describes the performance of the ARS chip; results from the fu…
Development of an optical link card for the upgrade phase II of TileCal experiment
2010
This work presents the design of an optical link card developed in the frame of the R&D activities for the phase 2 upgrade of the TileCal experiment as part of the evaluation of different technologies for the final choice in the next two years. The board is designed as a mezzanine which can work independently or plugged in the Optical Multiplexer Board of the TileCal backend electronics. It includes two SNAP 12 optical connectors able to transmit and receive up to 75 Gbps and one SFP optical connector for lower speeds and compatibility with existing hardware as the Read Out Driver. All processing is done in a Stratix II GX FPGA. Details are given on the hardware design including signal and …
Error mitigation using RaptorQ codes in an experimental indoor free space optical link under the influence of turbulence
2015
In free space optical (FSO) communications, several factors can strongly affect the link quality. Among them, one of the most important impairments that can degrade the FSO link quality and its reliability even under the clear sky conditions consists of optical turbulence. In this work, the authors investigate the generation of both weak and moderate turbulence regimes in an indoor environment to assess the FSO link quality. In particular, they show that, due to the presence of the turbulence, the link experiences both erasure errors and packet losses during transmission, and also compare the experimental statistical distribution of samples with the predicted Gamma Gamma model. Furthermore,…
A PCI Express optical link based on low-cost transceivers qualified for radiation hardness
2013
In this paper we want to demonstrate that an optical physical medium is compatible with the second generation of PCI Express. The benefit introduced by the optical decoupling of a PCI Express endpoint is twofold: it allows for a geographical detachment of the device and it remains compliant with the usual PCI accesses to the legacy I/O and memory spaces. We propose two boards that can bridge the PCI Express protocol over optical fiber. The first is a simple optical translator while the second is a more robust switch developed for connecting up to four devices to a single host. Such adapters are already working in the control and data acquisition system of a particle detector at CERN and hen…
Indoor free space optics link under the weak turbulence regime: Measurements and model validation
2015
In this study, the authors present the measurements performed on a free space optics (FSO) communications link using an indoor atmospheric chamber. In particular, the authors have generated several different optical turbulence conditions, demonstrating how even the weak turbulence regime can strongly affect the FSO link performance. The authors have carried out an in-depth analysis of the data collected during the measurements, and calculated the turbulence strength (i.e. scintillation index and Rytov variance) and the important performance metrics (i.e. the Q-factor and bit error rate) to evaluate the FSO link quality. Moreover, the authors have tested, for the first time, an appositely de…